What Are The Wrong Methods For The Maintenance Of Dump Semi-trailer

1. Remove the engine thermostat blindly

Some drivers believe that the temperature of the driving engine is high but not low, so they blindly remove the engine thermostat. The coolant can only be used for a large cycle and the cooling intensity cannot be adjusted. Therefore, the engine often works under low temperature conditions, resulting in loss of power, wear, increased fuel consumption, etc. In fact, low temperature is harmful to the engine. The service specification of the vehicle shall be limited at normal temperature to ensure the service life of the engine.

2. The tighter the fan belt, the better

It's not better to tighten it. If the belt is too tight, it will not only stretch or damage it and shorten the service life of the belt, but also cause bending deformation of generator shaft and pump shaft and early damage of bearing due to too much pressure. Loose Trailer engine fan belt shall meet the technical requirements. Generally, the assembly deviation of normal belt shall be 10 to 15 mm.

The above is about the improper maintenance methods of dump semi-trailer. We should also pay attention to the maintenance methods when we use them at ordinary times. At the same time, if you still have questions you don't understand, you are welcome to consult us in time. We will reply to you in time and look forward to your cooperation.